Hybrid Servo Motor, Stable NEMA34 12N.m Close Loop Bipolar Stepper Motor with Driver Controller Kit for CNC Router Support Single Double Pulse Input

£189.01

(as of 13/12/2019 at 15:36 GMT)

Product Description

Features: Software can set the position command smoothing filter time, the motor runs smoother, the vibration is more slight, and the dynamic performance of acceleration and deceleration is improved. After the positioning is completed, the vibration-free nospeed static ability. Can drive 86 series 4N.m, 8N.m, 12N.m close-loop stepper motor.  Support single and double pulse input, the impulse response frequency can reach up to 200KHZ. Support 15 fixed subdivisions, and support software to set any subdivision. Support modbusRTU protocol on RS232, support position and speeds control controlled by communication.
Specification:
Motor Specification:
Rated Voltage:70V
Rated Wattage:250W
Rated Rotation Speeds:0~3000rpm
Step Angle:1.8
Current:6A
Resistance:0.45ohm+-10%
Inductance:5.2mH+-20%
Static Moment:12Nm
Motor Length:156mm/6.14in
Encoder Resolution:1000PPR
Driver Specification:
Power Supply:AC 20~80V or DC 30~110V
Output Current:8.0A(Maximum)
Logical Input Current:7~20mA
Impulse Frequency:0~200KHz
Suitable for Motor:86HSE12N,86HSE8N,86HSE4N
Encoder Line Number:1000
Insulation Resistance:>=500Mohm
Using Environmental and Specification:
Cooling Mode:Natural cooling or external cooler 
Temperature:0~50℃
Humidity:40~90%RH
Storage Temperature:-20~65℃

Package List: 
1*Motor
1*Driver
1*RS232 Communication Line
1*Motor Encoder Signal Line (With Female Head)

Features

  • Support monitoring of motor running status, including speeds, position deviation, bus voltage, running current, etc.
  • Support modbusRTU protocol on RS232, support position and speeds control controlled by communication.
  • Support single and double pulse input, the impulse response frequency can reach up to 200KHZ.
  • With over-current, over-voltage, position tolerance and other protection.
  • The software is fit for the Window operating system.
SKU: B081T9NQJ4 Category:

Reviews

There are no reviews yet.

Be the first to review “Hybrid Servo Motor, Stable NEMA34 12N.m Close Loop Bipolar Stepper Motor with Driver Controller Kit for CNC Router Support Single Double Pulse Input”